Pabrik Ujung Tapered Tungsten Carbide
Fitur-fitur
1. Kapabilitas mesin serbaguna: Mesin penggiling ujung tirus bisa digunakake kanggo macem-macem operasi mesin, kalebu kontur, slotting, lan pengeboran. Desain tirus ngidini mbusak bahan kanthi efisien lan pemotongan sing tepat ing pirang-pirang arah.
2. Akses lan jangkauan sing luwih apik: Wangun end mill sing lancip nyedhiyakake akses sing luwih apik menyang area sing angel dijangkau lan ngidini operasi panggilingan sing jero. Iki utamane migunani nalika nggarap bagean sing kompleks utawa rongga ing njero.
3. Evakuasi chip sing luwih apik: Desain suling saka end mill sing lancip mbantu ngevakuasi chip kanthi efisien. Kanthi volume suling sing luwih gedhe lan jarak sing luwih amba, iki efektif kanggo mbusak chip saka area pemotongan, nyuda risiko pemotongan ulang chip lan ningkatake kinerja alat sakabèhé.
4. Stabilitas lan kekakuan sing tambah: Pabrik ujung tirus tungsten karbida dirancang kanggo nyedhiyakake stabilitas lan kekakuan sing tambah sajrone ngethok. Wangun kerucut mbantu nyebarake gaya ngethok kanthi luwih rata, nyuda getaran lan nyuda defleksi, sing nyebabake akurasi lan lapisan permukaan sing luwih apik.
5. Kasedhiya macem-macem sudut lancip: Mesin penggiling ujung lancip kasedhiya ing macem-macem sudut lancip, kayata 3°, 5°, 7°, lan liya-liyane. Pilihan sudut lancip gumantung saka syarat aplikasi tartamtu, kayata diameter pemotongan sing dikarepake lan bahan sing diolah.
6. Pilihan pelapisan: Pabrik ujung tirus tungsten karbida bisa dilapisi nganggo macem-macem lapisan, kayata TiAlN, TiCN, utawa AlTiN, kanggo luwih ningkatake kinerjane. Lapisan nyedhiyakake umur pahat sing luwih dawa, gesekan sing luwih sithik, lan tahan panas sing luwih apik, gumantung saka lapisan tartamtu sing ditrapake.
Tampilan rinci
PABRIK
| End mill spiral lan irung bal rong seruling | |||||
| Ditrapake: Aluminium, plastik, bagean plastik, bagean tembaga, paduan aluminium, cetakan baja tahan karat, kayu | |||||
| NO | SHK | 1/2 CED(mm) | CEL | OVL | |
| 2fbn30.2515 | 3.175 | 0.25 | 15 | 38.5 | |
| 2fbn30.515 | 3.175 | 0.5 | 15 | 38.5 | |
| 2fbn30.7515 | 3.175 | 0.75 | 15 | 38.5 | |
| 2fbn31.015 | 3.175 | 1 | 15 | 38.5 | |
| 2fbn40.2515 | 4 | 0.25 | 15 | 50 | |
| 2fbn40.515 | 4 | 0.5 | 15 | 50 | |
| 2fbn40.7515 | 4 | 0.75 | 15 | 50 | |
| 2fbn41.015 | 4 | 1 | 15 | 50 | |
| 2fbn40.2520.5 | 4 | 0.25 | 20.5 | 50 | |
| 2fbn40520.5 | 4 | 0.5 | 20.5 | 50 | |
| 2fbn40.7520.5 | 4 | 0.75 | 20.5 | 50 | |
| 2fbn41.020.5 | 4 | 1 | 20.5 | 50 | |
| 2fbn60.2520.5 | 6 | 0.25 | 20.5 | 50 | |
| 2fbn60.520.5 | 6 | 0.5 | 20.5 | 50 | |
| 2fbn60.7520.5 | 6 | 0.75 | 20.5 | 50 | |
| 2fbn61.020.5 | 6 | 1 | 20.5 | 50 | |
| 2fbn602530.5 | 6 | 0.25 | 30.5 | 75 | |
| 2fbn60.530.5 | 6 | 0.5 | 30.5 | 75 | |
| 2fbn60.7530.5 | 6 | 0.75 | 30.5 | 75 | |
| 2fbn61.030.5 | 6 | 1 | 30.5 | 75 | |
| 2fbn61.530.5 | 6 | 1.5 | 30.5 | 75 | |
| 2fbn62.030.5 | 6 | 2 | 30.5 | 75 | |
| 2fbn80.547 | 8 | 0.5 | 47 | 85 | |
| 2fbn81.047 | 8 | 1 | 47 | 85 | |
| 2fbn81.547 | 8 | 1.5 | 47 | 85 | |
| 2fbn82047 | 8 | 2 | 47 | 85 | |
| 2fbn80.560 | 8 | 0.5 | 60 | 100 | |
| 2fbn81.060 | 8 | 1 | 60 | 100 | |
| 2fbn81.560 | 8 | 1.5 | 60 | 100 | |
| 2fbn82.060 | 8 | 2 | 60 | 100 | |
| 2fbn10270 | 10 | 2 | 70 | 110 | |
| 2fbn12270 | 12 | 2 | 70 | 120 | |
-
Pemotong annular TCT 75mm, 100mm kanthi shank weldon
-
Pabrik Akhir kothak Tungsten Carbide HRC65
-
Set mata bor kombinasi 16pcs
-
Mata bor inti berongga HSS kedalaman pemotongan 50mm dengan tangkai satu sentuhan
-
Burr Putar Tungsten karbida tipe N kanthi bentuk kerucut terbalik
-
Pemotong giling HSS Morse Taper Shank utawa shank lurus dovetail